20 stern ave. springfield, new jersey 07081 u.s.a. b40c 5000 rs501 thru b380c /rs507 5000 / telephone: (973) 376-2922 (212)227-6005 fax: (973) 376-8960 technical specifications of single-phase silicon bridge rectifier voltage range - 50 to 1000 volts current - 5.0 amperes features * high surge cuhent capability * ideal for printed circuit board * low forward voltage mechanical data * case: molded plastic * epoxy: ul 94v-0 rate flame retardant * lead: mil-std-202e, method 208 guaranteed * polarity: symbols molded or marked on body * mounting position: any * weight: 25.3 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20%. rs-5 .1b8(4.8)x45' ^ min. .400 .300 .300 .365 .385 .285 .285 .345 spacin dimensions in inches and (millimeters) maximum recurrent peak reverse voltage maximum rms bridge input voltage maximum dc blocking voltage maximum average forward output current at ta = 50c peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method) maximum forward voltage drop per element at maximum cd reverse current at rated dc blocking voltage per element i2t rating for fusing (t<8.3ms) 3.0a dc @ta = 25c @ta= 100c typical junction capacitance ( motel) typical thermal resistance (note 2) operating temperature range storage temperature range symbol vrrm vrms vdc lo ifsm vf |r i2t cj r9ja tj tstg rs501 50 35 50 b40c 5000 rs502 100 70 100 b80c 5000 rs503 200 140 200 B125C 5000 rs504 400 280 400 b250c 5000 rs505 600 420 600 rs506 800 560 800 b380c 5000 rs507 1000 700 1000 5.0 30 1.0 10 500 312 15 2.0 -55to + 125 -55 to + 1 50 units volts volts volts amps amps volts uamps a2sec pf c/w c "c notes : 1 .measured at 1 mhz and applied reverse voltage of 4.0 volts 2. thermal resistance from junction to ambient and from junction to lead mounted on p.c.b. with 0.47 x 0.47" (12x12mm) copper pads. quality semi-conductors
|
